rece0NgkqWDtq3qXP
← All programs

Find a program that fits

Mechanics and Machine Design

Mechanics and Machine Design at Cracow University of Technology is an English-taught master's in Kraków, Poland. This full-time M.Eng. builds on an engineering bachelor's with advanced mechanics, FEM/CAE and design methods, so review the requirements and study fit.

Ask StudyFits AI

01 / The bigger picture

Program at a glance.

Mechanics and Machine Design at Cracow University of Technology is an English-taught M.Eng. master's in Kraków, Poland. Over three semesters it covers advanced mechanics, machine dynamics, FEM and CAE tools, design methodology and manufacturing, ending with a diploma project. It may interest international engineering graduates who want to study mechanical engineering in Poland at master's level.

Program overview

A full-time M.Eng. at Cracow University of Technology in Kraków, Poland, taught in English over 3 semesters and 90 ECTS. It builds on a related engineering bachelor's with advanced mechanics, machine dynamics and computer-aided design, and may prepare graduates for design roles or further study.

What you will focus on

Core areas include advanced mechanics, machine dynamics, the finite element method and computer-aided engineering, design methodology and manufacturing. The studies end with a master's diploma project, where students apply these tools to a machine design problem.

Who this program may suit

Mechanics and Machine Design at Cracow University of Technology may suit graduates of a related engineering bachelor's who want to specialise in machine design and engineering analysis. It can be a good option for students who like simulation, CAE tools and project work and are ready for full-time study in English at B2 level.

Study level & format

Mechanics and Machine Design at Cracow University of Technology is a second-cycle Master's Degree (M.Eng., magister inżynier) taught in English. It is a full-time course lasting 3 semesters (1.5 years) with 90 ECTS, based at the Faculty of Mechanical Engineering in Kraków.

Cost overview

For Mechanics and Machine Design at Cracow University of Technology, the programme page shows tuition of €1,750 per semester (€3,500 per year), while the current fee table lists €5,000 per year, so the 2026/27 fee should be confirmed. The programme pages list a €20 application fee. No program-specific scholarship is published.

Admission fit

Mechanics and Machine Design at Cracow University of Technology may be suitable for applicants holding a related first-cycle engineering degree. Selection is based on a diploma competition and review of the bachelor's programme, with no subject entrance exam for this master's. Applicants need B2 English proof, and holders of some foreign diplomas may need a NAWA recognition statement.

Before you apply

Before applying to Mechanics and Machine Design at Cracow University of Technology, students should check that their bachelor's is in a related engineering field and prepare a legalized, sworn-translated diploma and transcript. They should also arrange B2 English proof, check whether NAWA recognition is needed and note that the current round closes on 5 February 2027.

Recommended next step

Before choosing Mechanics and Machine Design at Cracow University of Technology, students can ask the StudyFits AI Advisor to compare it with other mechanical engineering master's options in Poland. The Advisor can review how their engineering background, English level and budget fit this Kraków course.

02 / Make room for the details

Program Overview

Mechanics and Machine Design at Cracow University of Technology is a full-time Master’s Degree (M.Eng.) taught in English in Kraków, Poland. Run by the Faculty of Mechanical Engineering, the course lasts three semesters, carries 90 ECTS and leads to the Polish magister inżynier title. It is a second-cycle option for international students who already hold a related engineering bachelor’s and want a mechanical engineering master’s in Poland.

The program focuses on how machines are analysed, simulated and designed, combining mechanics with modern computer-aided tools. Because it is short and focused, it may appeal to graduates who want a compact English-taught machine design master’s. Full details, including the current curriculum, should be checked on the official program page before making plans.

What You Will Study

In Mechanics and Machine Design at Cracow University of Technology, students may study advanced mechanics, machine dynamics, the finite element method and computer-aided engineering, design methodology and manufacturing. These areas give the M.Eng. a strong analytical and design profile, linking theory with simulation and the practical side of producing machine parts, and they build directly on a related engineering bachelor’s.

The studies lead into a master’s diploma project, where students bring these subjects together in their own engineering work. The current English-taught specialisation set is not described in detail, so it is worth reviewing the latest curriculum on the official program page. Students who are unsure how the subjects match their bachelor’s can ask the StudyFits AI Advisor for a quick comparison.

Who This Program May Suit

Mechanics and Machine Design at Cracow University of Technology may suit students who already hold a related engineering bachelor’s and want to specialise in machine design and engineering analysis. It can be a good option for those who enjoy mechanics, simulation with FEM and CAE tools and project-based work, and who want an English-taught mechanical engineering master’s in Poland.

The course may also appeal to graduates who prefer a shorter, three-semester route and are comfortable studying full time in English at B2 level. Students should compare the listed subjects with their previous coursework, learning style and long-term goals before deciding. If the fit is unclear, the enquiry form on this page offers a simple, low-effort way to get personal guidance.

Admission Fit & Requirements

For Mechanics and Machine Design at Cracow University of Technology, applicants should review whether their first-cycle degree is in a related engineering field, as admission is based on a diploma competition. The committee looks at the completed bachelor’s programme and diploma supplement, and the diploma and transcript must be legalized or apostilled and translated by a sworn translator. Holders of some foreign diplomas may also need a NAWA recognition statement.

English at B2 level is required, shown with an accepted certificate or a qualifying English-taught degree. No subject entrance exam is listed, and the PK mathematics exam applies only to first-cycle admission. Applications go through the online recruitment system, where documents are uploaded and the fee is paid. Students who want to check their profile can use the StudyFits AI Advisor first.

Tuition Fees & Cost Signal

For Mechanics and Machine Design at Cracow University of Technology, students should review two tuition figures. The programme page shows €1,750 per semester, or €3,500 per year, while the university’s current tuition-fees table lists €5,000 per year for English-taught master’s studies at the Faculty of Mechanical Engineering. The fee for the 2026/27 summer intake should be confirmed before budgeting.

The programme pages list a €20 application fee, within PK’s general range of about €20 to €35, so the exact figure should be checked in the recruitment system. Installment options and program-specific scholarships are not published, although NAWA programs for foreign students may be worth reviewing. For a profile-based cost comparison with similar engineering master’s courses, the StudyFits AI Advisor can help.

Career Paths & Future Options

Students considering Mechanics and Machine Design at Cracow University of Technology may use this program to build advanced skills in mechanics, machine dynamics, FEM and CAE analysis, design methodology and manufacturing. Possible paths include machine design, engineering simulation, product development or manufacturing engineering roles, depending on each graduate’s background, language skills and the local job market.

The master’s diploma project, built around an engineering problem, may also support further study, such as doctoral research in mechanics or mechanical engineering. Some engineering activities may depend on country-specific professional rules or certification, so graduates should check these separately for the country where they plan to work. To compare the course with personal career goals, students can ask the StudyFits AI Advisor for profile-based guidance.

Study Location Advantage

Studying Mechanics and Machine Design at Cracow University of Technology in Kraków, Poland gives students access to a public technical university in a large academic city. For international students, an English-taught mechanical engineering master’s in Kraków can combine focused technical study at the Faculty of Mechanical Engineering with life in a large and diverse student community.

Poland may also be an attractive study destination for students who want an English-taught engineering master’s within the European higher education area. Living costs, residence formalities, health insurance and accommodation vary from student to student, so these practical matters should be checked through official sources before arrival. Students comparing Kraków with other cities or countries can use the StudyFits AI Advisor for location-based guidance.

Compare This Program With AI Advisor

Before choosing Mechanics and Machine Design at Cracow University of Technology, students can use the StudyFits AI Advisor to compare it with other mechanical engineering and machine design master’s programs. The Advisor looks at the course alongside options in other Polish cities and other countries, using the student’s own priorities rather than general rankings.

It can help review academic background, English level, budget, preferred study destination and future goals, which is useful while the tuition figure for this intake still needs confirmation. The result is a clearer shortlist, not a prediction of admission. For personal support, the enquiry form on this page is also available.

FAQ

Q: What is Mechanics and Machine Design at Cracow University of Technology?
A: It is a full-time, English-taught Master’s Degree (M.Eng.) in Kraków lasting three semesters and 90 ECTS. It covers advanced mechanics, machine dynamics, FEM and CAE, design methodology and manufacturing, and ends with a diploma project. Students should confirm the latest curriculum on the official page.

Q: Who may suit this mechanical engineering master’s in Kraków?
A: It may suit graduates of a related engineering bachelor’s who want to specialise in machine design and engineering analysis. Students should be comfortable with mechanics, simulation tools, project work and full-time study in English at B2 level.

Q: What are the admission requirements for this M.Eng. in Poland?
A: Applicants need a related first-cycle engineering degree, reviewed in a diploma competition, plus B2 English proof. Documents must be legalized and translated, and some foreign diplomas need NAWA recognition. No subject entrance exam is listed, but students should confirm the current rules.

Q: How much is tuition for Mechanics and Machine Design at PK?
A: The programme page shows €1,750 per semester (€3,500 per year), but the current tuition-fees table lists €5,000 per year for this faculty’s English-taught master’s. Students should confirm the fee for the 2026/27 summer intake before budgeting.

Q: How can the StudyFits AI Advisor help compare this course?
A: The AI Advisor can compare this M.Eng. with similar programs using the student’s background, English level, budget and goals. It helps build a shortlist without predicting admission. The enquiry form on this page is available for personal questions.

Does this program fit your plan?

Check your fit in a free chat with the AI Advisor - entry requirements, language level, budget and deadlines for your profile. Ready to decide? Get the full personal report.

Get your personal report

Country guide

Illustration of Polish architecture, coast and mountains

Study in Poland: Compare StudyFits-listed programs, universities, student cities, tuition ranges, and practical cost insights for international students.

City guide

AI-generated architectural miniature inspired by Kraków

Poland

Study in Kraków, Poland: compare StudyFits-listed universities and programs with student life, moderate living costs, safety context, and city guidance.

03 / Get in touch

Contact this school about the program.

University/Program Contact Form

Share your details and we'll connect you with Mechanics and Machine Design so their team can reach out about your application.

Responses

Leave a Reply

Useful details

Program status

Open

Tuition fee

€3,500/year or €5,000/year, confirm

StudyFits update

2026-11-03T00:00:00.000Z
In this guide