recfz9A6sicwdOlEX
← All programs

Find a program that fits

Management and Production Engineering

Management and Production Engineering at Silesian University of Technology in Gliwice, Poland, is a B.Eng. program lasting seven semesters. The English-taught route supports comparison of engineering, production and management with your academic background and study goals. Review the requirements and study fit.

Ask StudyFits AI

01 / The bigger picture

Program at a glance.

Management and Production Engineering at Silesian University of Technology is a full-time B.Eng. program in Gliwice, Poland, taught in English. It offers a seven-semester route focused broadly on engineering, production and management. International students can use the available study, language and admission details to compare this option with their academic interests and preparation before making a decision.

Program overview

Management and Production Engineering at Silesian University of Technology is a full-time bachelor's program in Gliwice, Poland. The seven-semester English-taught route gives international students a practical basis for comparing study in engineering, production and management with their academic plans.

What you will focus on

Study focuses broadly on technical problem solving, production planning and the management side of engineering decisions. The current record does not publish a detailed course list or separate English-taught tracks, so students should review the latest faculty syllabus before comparing specific modules.

Who this program may suit

Management and Production Engineering at Silesian University of Technology may suit students who want to connect engineering analysis with production planning and organisational decision making. Applicants should also be ready for full-time study, a Mathematics Entry Examination and B2 English proof.

Study level & format

Management and Production Engineering at Silesian University of Technology is a full-time B.Eng. program in Gliwice. The stated duration is seven semesters, or three and a half years, and the listed language of instruction is English.

Cost overview

For Management and Production Engineering at Silesian University of Technology, tuition for the 2026/2027 cycle is 1,700 EUR for the first semester and 7,500 PLN for each subsequent semester, according to the IRK offer for foreign candidates. The general recruitment fee is not stated in the available source fields. A separate 4 EUR Mathematics Entry Examination fee is listed. Students should check the official program page for current tuition, recruitment charges and payment timing.

Admission fit

Management and Production Engineering at Silesian University of Technology may fit applicants with a school-leaving qualification that permits first-cycle study and B2 English readiness. The process includes document review, a Mathematics Entry Examination and possible foreign-education recognition steps. Applicants should compare these conditions with their own education and current university instructions.

Before you apply

Before choosing Management and Production Engineering at Silesian University of Technology, students should check the current intake timetable, their school-leaving qualification, B2 English proof, required documents and recognition needs. They should also confirm the Mathematics Entry Examination schedule and current instructions in the official IRK system.

Recommended next step

Before choosing Management and Production Engineering at Silesian University of Technology, compare its seven-semester format, English study, academic focus and current cost information with similar options. The StudyFits AI Advisor can help relate these points to your background, language readiness, budget and study goals.

02 / Make room for the details

Program Overview

Management and Production Engineering at Silesian University of Technology in Gliwice, Poland, is a full-time B.Eng. program taught in English over seven semesters. It gives international students a defined first-cycle route in engineering, production and management. The available record presents one field of study and does not enumerate separate English-taught specializations, so the current faculty syllabus remains important when comparing detailed study choices.

For decision-making, students can compare the stated format, language and broad academic direction with their own background and preferred learning style. The available source fields do not provide a complete module list or exact tuition amount. Current curriculum, fee and intake details should therefore be checked through the official program information before treating the option as a close fit.

What You Will Study

Study in Management and Production Engineering focuses broadly on technical problem solving, production planning and the management side of engineering decisions. The record supports this general direction through the program title, discipline and existing student-facing fields, but it does not provide a full course list. Students can use this broad focus to decide whether the subject area matches the kind of technical and analytical learning they want from a bachelor’s program.

No separate English-taught tracks are enumerated in the current source fields. A student who needs a specific module sequence, laboratory emphasis or specialization should review the latest faculty syllabus rather than assume those details. Comparing the official curriculum with similar engineering, production and management programs can make differences in scope, language and study structure clearer before a final choice.

Who This Program May Suit

Management and Production Engineering may suit students who want to connect engineering analysis with production planning and organisational decision making. The full-time, seven-semester format calls for sustained academic preparation and comfort with technical problem solving. Applicants should also be ready to demonstrate B2 English for the stated English-taught route.

Admission preparation includes a school-leaving qualification that permits first-cycle study, formal document review and the stated Mathematics Entry Examination. Foreign education may also require an eligibility statement, recognition, legalisation or translation steps. Students should compare these conditions with their own documents, language evidence and study goals, using the StudyFits AI Advisor if they want a profile-based comparison. Current official information remains necessary for any detailed curriculum, fee and timetable comparison, and students should not assume unlisted study features.

Admission Fit & Requirements

Admission fit for Management and Production Engineering depends first on a school-leaving document that permits first-cycle study, together with the supporting eligibility evidence required for the applicant’s country and qualification. Formal document and academic-record review forms part of the process. Some foreign certificates may also require a NAWA recognition statement, while legalisation or apostille and accepted translations can apply according to the published rules.

Applicants must show at least B2 English through an accepted certificate or another proof route recognised by the university. First-cycle candidates also face the stated online Mathematics Entry Examination, with one attempt, a 4 EUR fee and a published pass threshold of 30 percent. Current evidence, dates and procedures should be checked in the official IRK instructions. Applicants should compare every requirement with their own documents before relying on this summary.

Tuition Fees & Cost Signal

For the 2026/2027 cycle, the IRK registration offer for foreign candidates lists tuition for Management and Production Engineering as 1,700 EUR for the first semester and 7,500 PLN for each subsequent semester. The record states that first-semester tuition is paid in EUR after conditional acceptance and before final acceptance or visa documents, while later semesters are paid in PLN. Because installment options are not published here, students should confirm the current figures and payment schedule on the official program page.

The general recruitment fee is also not stated in the available English information, although payment is handled through the IRK Payments tab. A separate 4 EUR fee is listed for the Mathematics Entry Examination and should not be confused with tuition or the recruitment fee. General university support schemes may exist for eligible students, but no program-specific funding is confirmed. Compare the full cost signal with similar programs or ask the StudyFits AI Advisor for a profile-based check.

Career Paths & Future Options

Students considering Management and Production Engineering may use the program as a basis for exploring production planning, operations coordination, quality-focused work or further engineering study. These are possible directions inferred from the program’s stated field, not promised outcomes. Because the current source fields do not provide a detailed curriculum, students should compare the latest syllabus with the skills and subject areas expected in the roles or further study routes they are considering.

A B.Eng. can also support later academic planning when the next program accepts the student’s prior qualification and subject preparation. Professional responsibilities, recognition and access to regulated activities can depend on the role and country, so no automatic right should be assumed. The StudyFits AI Advisor can help compare the program’s broad direction with personal goals, while official sources remain necessary for detailed curriculum and professional rules.

Study Location Advantage

Studying Management and Production Engineering at Silesian University of Technology places the program in Gliwice, Poland, within a public university setting. For an international student, location matters alongside subject fit because it shapes the study environment and the practical comparison with other destinations. The current record supports the city, country and institutional type, but it does not provide specific claims about costs, transport, safety or employment.

Students can compare Gliwice with other Polish study locations by considering language, program format, personal budget and preferred academic environment. The seven-semester full-time structure also makes location a long-term planning factor rather than a short visit. Use the StudyFits AI Advisor for a location-based comparison, then check official university and local information for current practical details that are not included in the program record.

Compare This Program With AI Advisor

Before choosing Management and Production Engineering at Silesian University of Technology, students can use the StudyFits AI Advisor to compare this option with similar bachelor’s programs. The comparison can consider academic background, English readiness, degree level, seven-semester format, destination and broad engineering, production and management focus. It can also highlight which official details still need confirmation.

A useful comparison should include the tuition amount, the separate Mathematics Entry Examination and any recognition steps linked to foreign education. Students can add their budget, study preferences and future goals to receive a more personal fit review. The AI Advisor supports reflection and comparison, but current admission, fee and curriculum rules should still be confirmed through official university information.

FAQ

Q: What does Management and Production Engineering at Silesian University cover?
A: The program is a full-time, seven-semester B.Eng. route in Gliwice, focused broadly on engineering, production and management. The current record does not publish a complete module list, so students should check the latest faculty syllabus for exact course content and any current study tracks.

Q: Who may suit this B.Eng. program in Poland?
A: It may suit students who want to connect engineering analysis with production planning and organisational decision making. Students should compare the full-time format, technical focus and language requirements with their previous education, preferred learning style and longer-term goals before deciding whether the route fits them.

Q: What are the admission requirements for Management and Production Engineering?
A: Applicants need a school-leaving qualification that permits first-cycle study, the required language evidence, supporting documents and the stated Mathematics Entry Examination. Foreign education may also require eligibility, recognition, legalisation or translation steps, depending on the applicant’s documents and country.

Q: What does Management and Production Engineering cost at Silesian University?
A: For the 2026/2027 cycle, the IRK offer for foreign candidates lists 1,700 EUR for the first semester and 7,500 PLN for each subsequent semester. The general recruitment fee is not stated in the available source fields. A separate 4 EUR Mathematics Entry Examination fee is listed. Students should confirm current tuition, charges, payment timing and any available support through official university information.

Q: How can StudyFits compare this program for me?
A: The StudyFits AI Advisor can compare academic background, English readiness, budget, destination, degree level and study goals with similar options. It can help frame useful questions, while official university sources remain necessary for current admission, curriculum and fee details.

Does this program fit your plan?

Check your fit in a free chat with the AI Advisor - entry requirements, language level, budget and deadlines for your profile. Ready to decide? Get the full personal report.

Get your personal report

Country guide

Illustration of Polish architecture, coast and mountains

Study in Poland: Compare StudyFits-listed programs, universities, student cities, tuition ranges, and practical cost insights for international students.

City guide

AI-generated architectural miniature inspired by Gliwice

Poland

Study in Gliwice, Poland: explore engineering-focused programs, student life, rent and transport costs, safety context and city guidance for students.

03 / Get in touch

Contact this school about the program.

University/Program Contact Form

Share your details and we'll connect you with Management and Production Engineering so their team can reach out about your application.

Responses

Leave a Reply

Useful details

Program status

Closed

Tuition fee

1,700 EUR (1st semester), then 7,500 PLN/semester

StudyFits update

In this guide